![]() From start you have the following:įilesystem Size Used Available Use% Mounted on The problem is the size of the android internal partitions. So you have to export the zip file pmos-*.zip, copy it to the sdcard and install it in recovery mode. For S5830i there is only CWM 5.0.2.8 available (maybe others ?), which does not feature sideloading. ![]() You can flash Clockworkmod Recovery (CWM, discontinued in 2016), which enables to flash a zip from sdcard. It may come from bad values in the deviceinfo file. Problem: Odin fails with the following log Then run the exported file 5 in Odin using the BL section. A community forum started in May 2020, with an explanation of the interface.Ĭreate an Odin-compatible file with the following commands. Odin is a proprietary software from Samsung to flash Samsung phone. Possible workaround: there is a workaround patching heimdall for bypassing libusb checks, more info in comments of github issue: With Odin ![]() Problem: flashing the kernel fails at the step Setting up interface with error error setintf failed error -1 errno 110, you can refer to the 6 years old gitlab issue on heimdall. (As there is not enough space on the phone.) Heimdall ( XDA Forum, gitlab) is the open-source alternative to Odin.įirst, enter the flash mode and flash the kernel into the phone. The kernel was not successfully booted yet, but here are the explored leads. This phone is not compatible with fastboot. Pmbootstrap checksum device-samsung-s5830iįlash the kernel to the phone (not working) Pmbootstrap checksum linux-samsung-s5830i Mabope - December 2020īuilding the kernel (working) pmbootstrap init # select samsung-s5830i If it is confirmed that this step does not work, someone should move this device to the "not booting" section and homogenize this page's content. ) whereas this section clearly states that we can not get pass the flashing step. Also keep in mind that the information is not consistent : some information in this page may still reflect the status of the previous port (device booting, kernel flashing etc. Any information on how to perform this step is very welcomed. We did not achieve to flash the bootimg + intramfs on the device, even if this was stated as working in the previous port (see error in Heimdall below). The previous port from 2018 was outdated (using former APKBUILD format) so a new port was started.Press Power + Volume Up + Volume Down to start the phone into flash mode ![]() You can choose the items with Volume Up and Volume Down and enter with the Home button Press Power + Volume Up + Home to start the phone into recovery mode. Sputnik1973 ( Notes: No screen, don't know if it works.).Maxnet ( Notes: booting into bootloader fails). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |